STERNDRIVE SPACER
BLOCKS for Mercruiser
Bravo® drives are
installed between the
upper driveshaft housing
and the lower gear case,
effectively lowering
the prop shaft in 1/2"
increments. This takes
the risk out of "guesstimating"
the proper X dimension
on new installations.
You can set the transom
plate higher than normal,
then install spacers
to drop the prop to
the correct depth. Each
kit includes one spacer
block, driveshaft coupling,
O-rings and all fasteners
for one drive. Spacer
kits are available for
Bravo I®,II®
and III® drives
as well as Bravo drives
with the Mercruiser
Sportmaster® lowers.
BRAVO
I® & III®
DRIVES
KPLT-8521 1/4"
SPACER KIT
FOR BRAVO
I &
III DRIVES
KPLT-8523
1/2"
SPACER KIT
FOR BRAVO
I &
III DRIVES
KPLT-8522
3/4"
SPACER KIT
FOR BRAVO
I &
III DRIVES
KPLT-8524
1"
SPACER KIT
FOR BRAVO
I &
III DRIVES
KPLT-8525
1-1/2"
SPACER KIT
FOR BRAVO
I &
III DRIVES
KPLT-8526
2"
SPACER KIT
FOR BRAVO
I &
III DRIVES
KPLT-8527
2-1/2"
SPACER KIT
FOR BRAVO
I &
III DRIVES
KPLT-8528
3"
SPACER KIT
FOR BRAVO
I &
III DRIVES
BRAVO II® DRIVE
KPLT-8532
1/2"
SPACER KIT
FOR BRAVO
II DRIVE
KPLT-8533
1"
SPACER KIT
FOR BRAVO
II DRIVE
KPLT-8534
1-1/2"
SPACER KIT
FOR BRAVO
II DRIVE
KPLT-8535
2"
SPACER KIT
FOR BRAVO
II DRIVE
KPLT-8536
2-1/2"
SPACER KIT
FOR BRAVO
II DRIVE
KPLT-8537
3"
SPACER KIT
FOR BRAVO
II DRIVE
BRAVO SPORTMASTER®
DRIVE
KPLT-7777
1/4"
SPACER KIT
FOR BRAVO
SPORTMASTER,
2"L
KPLT-7778
1/2"
SPACER KIT
FOR BRAVO
SPORTMASTER,
2"L
KPLT-7779
3/4"
SPACER KIT
FOR BRAVO
SPORTMASTER,
2"L
KPLT-7780
1"
SPACER KIT
FOR BRAVO
SPORTMASTER,
2"L
KPLT-7781
1-1/2"
SPACER KIT
FOR BRAVO
SPORTMASTER,
2"L
KPLT-7782
2"
SPACER KIT
FOR BRAVO
SPORTMASTER,
2"L
KPLT-7783
1/4"
SPACER KIT
FOR BRAVO
SPORTMASTER
KPLT-7784
1/2"
SPACER KIT
FOR BRAVO
SPORTMASTER
KPLT-7785
3/4"
SPACER KIT
FOR BRAVO
SPORTMASTER
KPLT-7786
1"
SPACER KIT
FOR BRAVO
SPORTMASTER
KPLT-7787
1-1/2"
SPACER KIT
FOR BRAVO
SPORTMASTER
KPLT-7788
2"
SPACER KIT
FOR BRAVO
SPORTMASTER
PLEASE
NOTE THAT BRAVO® SPACER
KITS ARE NOT RETURNABLE
Mercruiser Bravo, Bravo, Bravo
I, Bravo II, Bravo III and
Bravo Sportmaster are registered
trademarks of the Brunswick
Corporation.
STERNDRIVE SPACER
BLOCKS for Mercruiser
Bravo® drives are
installed between the
upper driveshaft housing
and the lower gear case,
effectively lowering
the prop shaft in 1/2"
increments. This takes
the risk out of "guesstimating"
the proper X dimension
on new installations.
You can set the transom
plate higher than normal,
then install spacers
to drop the prop to
the correct depth. Each
kit includes one spacer
block, driveshaft coupling,
O-rings and all fasteners
for one drive. Spacer
kits are available for
Bravo I®,II®
and III® drives
as well as Bravo drives
with the Mercruiser
Sportmaster® lowers.
