THE CAPILANO®
(Seastar®) SYSTEM is the best
choice in self-contained manual hydraulic
helm assemblies. These smooth acting,
positive displacement helms have a convenient
adjustment knob to vary the fluid output
from 2.7 to 5.4 cubic inches per turn
of the wheel, thus varying the number
of turns from hardover port to hardover
starboard.
CAPILANO®
SYSTEM FLUID
CAPILANO®
SYSTEM FLUID
is carried
in the helm,
requiring
no air pressure
or separate
tank. The
shaft accepts
standard
3/4"
taper hubs,
and a remote
filler kit
is suggested
for easier
bleeding
and operation.
Only balanced
cylinders
and twin
cylinders
can use
the 1275V
helm. Single
unbalanced
cylinders
have to
use the
Hynautic®
helm and
reservoir
shown below.
HELM-3168
1275V
CAPILANO®
HELM
HELM-3165
FILLER
KIT, CAPILANO
HELMS, CHROME
HELM-3166
FILLER
KIT, CAPILANO
HELMS, BLACK
THE HYNAUTIC®
HELM AND RESERVOIR
THE HYNAUTIC® HELM
AND RESERVOIR are
required with self-contained
systems that consist
of a single unbalanced
cylinder as in the case
of a sidemount cylinder
on a single outboard
motor.
HELM-3172
Hynautic®
Helm, Single
Unbalanced
Ram
RESV-6000
Reservoir
Tank W/Valve,
Hynautic
Helm
CAPILANO,
Seastar and HYNAUTIC are registered
trademarks of Teleflex Incorporated.
* Note:
Please refer to the website hierarchy
for the list of sub-categories to
link to from this page. These are
already listed and described in
detail in this document.
CAPILANO®
SYSTEM FLUID
is carried
in the helm,
requiring
no air pressure
or separate
tank. The
shaft accepts
standard
3/4"
taper hubs,
and a remote
filler kit
is suggested
for easier
bleeding
and operation.
Only balanced
cylinders
and twin
cylinders
can use
the 1275V
helm. Single
unbalanced
cylinders
have to
use the
Hynautic®
helm and
reservoir
shown below.
